Trailer Mats

Product Demo

Here is the product demo for the Trailer Mats, which demonstrates how the product can be used in a step-by-step guide. Use the arrows to step through the demo.

Step 1 of 5: Trailer Mats viewed from the front.

Step 2 of 5: Trailer Mats viewed from the rear.

Step 3 of 5: Fall protection provided around the full perimeter of the trailer.

Step 4 of 5: Viewed from above

Step 5 of 5: Provides fall protection when unloading from the back of a delivery vehicle.

Previous Next

What is it?

While unloading a delivery vehicle there is always a chance of a slip, trip or fall from height which can cause serious injury

Key Benefits

  • Quick and easy to install
  • No working at height
  • Power tool free installation
  • Easy to cut and adapt
  • Strong re-usable and recyclable
  • Can be fitted before or after pipe installation

About the Product

Beresford's can now offer a modular airbag system which can accommodate a variety of truck and trailer lengths.

The system comprises of set of 4 x 10 ft, 4 x 12 ft, 2 corner and 1 x 8 ft back interconnecting airbags which when inflated will give 4 ft height, 6 ft wide air cushioned fall protection around the full perimeter of the truck / trailer and can be easily adjusted to suit the sites / vehicle requirements.

It only takes around 15 minutes to initially fully set up and inflate the system and once set up it needs only to be pulled apart / pushed together as the deliveries arrive. Once the system is no longer required it is quick and easy to deflate, strap up and move.

The heaviest 12 ft bag weighs only 24 kg. The whole system weighs around 160 kg (not including blowers) and when wrapped up can easily fit into the back of a small van, making it easy to transport and store.

The system is available on flexible cost effective hire terms from 1 day to 1 year.